AluFix is the hand-set formwork per se. It has technical features normally reserved for high-level formwork at an unbeatable price-performance ratio. Ideal for residential construction and renovation, in landscaping and light infrastructure works. An ergonomic grip profile makes handling easy, saves labour and increases your flexibility wherever concrete is poured without a crane. Available for purchase. Rent from authorised partners.
Panel heights 300, 264, 150, 132 and 75 cm, panel widths from 75 to 20 cm
90° inside and outside corners and steplessly adjustable articulated corners from 80° to 180°
Panel 150/75 with alkus facing weighs only 24,8 kg
Maximum concrete load capacity is 55 kN/m²
(German standard DIN 18218, table 3, line 6)
Frames made of closed 2-chamber hollow aluminium profiles
High-quality annealed powder coating
Profiles with grip recess for easy lifting by Hand
MEVA multi-function profile with welded-in Dywidag nuts
Tie hole with conical aluminium sleeve, welded in from both sides
3 tie holes per panel height 3,00 and 2,64 m, 2 per panel height 1,50 and 132 cm
Panel connection with compact MEVA assembly lock: one piece, weighs only 0,8 kg
All-plastic facing alkus, no swelling or shrinking
Easy repair of scratches or drill holes etc. on site with the same polypropylene material
Screwable and nailable without chipping off of top layer
The alkus facing lasts as long as the Frame
Compensating filler areas is simple within the AluFix system: up to 16 cm a filler timber and Uni clamp are the only parts that are needed. Excess forming area is always smaller than 40 cm thanks to the panel size range. Filler areas are thus minimised, allowing optimum adaptation to the building layout.
All accessories such as push-pull props, working platforms and accessories are attached with a flange screw to the welded-in DW threat in the multi-function profile. No nuts and bolts are needed and all attachments are safe and firm. Walkway brackets have a pin which fits into the same DW thread and automaticalls locks into safe position. No additional parts are needed and nothing can slip out.
All corners from 0° to 180° are covered by the system and need no site-built parts. A hinged corner provides additional flexibility. Inside corners are equipped with an all-plastic facing that allows bowouts to be fastened with little effort.
Foundations and small walls (e.g. for canals, swimming pools) can be formed with dry ties using a foundation tape and foundation tensioner below plus the push-pull strut 23 to replace the top tie.
Safe, fixed ladder access on AluFix panels achieved with a ladder holder.
Putting superlatives on Dubai’s skyline continues with the construction of the Rosemont Hotel and Residences on Sheikh Zayed Road.
Construction is underway on a complex of 489 villas in the Nad Al Sheba area of Dubai.
Al Mankhool is located in western Dubai and crossed by Al Mankhool Road, also referred to as Bank Street.
The residential units are built in a very short time and without cranes. The sturdy, yet light-weight hand-set system is the formwork of choice.
A new transit camp project is taking shape in the Anjirwadi district in the city of Mumbai. The high-rise tower, built with MEVA Formwork Systems, will function as a temporary housing for the residents of Bhendi Bazar. The accommodation will be provisional and free of charge for the duration of 15 years while clusters 3A and 3B are being built.
Mass house building: A new method using MEVA’s wall formwork AluFix saves time and money.
Push-pull props R and bracing brackets SRL are used to align and support wall formwork. Push-pull props SRL have left- and right threaded spindles. The brace bracket 250 consist of a push-pull-prop R 250 (190 - 320 cm) and bracing bracket SRL 120 (90 - 150 cm).
MEVA FormSet anchors for single-sided formwork, stop end rail and stop end bracket for slab edges and cantilevering slabs with safety mesh for slab edge fall protection