Owner: The Central European University Foundation, Amsterdam, the Netherlands
Contractor: Moratus KFT, Budapest
MEVA Systems: Wall formwork Mammut, partly with trapezoidal strips, Wall formwork Mammut 350, used and refurbished for architectural concrete finish, Special formwork designs for circular concrete structures
Engineering and support: MEVA Zsalurendszerek Zrt. Budapest, Hungary
The Central European University is a private university accredited in the USA and Hungary. It is based in Budapest. A new campus is being built in the heart of the city near the famous St.-Stephans-Basilika. The design of the new CEU campus blends in with the historic surrounding protected as a world cultural heritage by UNESCO. For this reason, the design was awarded BREEAM certification. The abbreviation stands for “building research establishment environmental assessment methodology“ and is regarded as the oldest method of assessing sustainable development in buildings. CEU is the second university in the whole of Europe to be certified according to this method.
To achieve the architect’s idea of architectural concrete in the staircase, MEVA engineers developed a special formwork design with the all-plastic facing alkus GM6. The walls were climbed on special platforms in 3 m lifts. The concrete finish is spotless.
The 30 cm thick slab above the elliptically shaped staircase was supported by special steel beams spanning 6 m. This way, work in the staircase could be continued without interruption.
The concrete walls separating the new building from the old were poured using Mammut 350 wall formwork, whose panels, 2.5 m wide and 3.5 m high, matched the layout of the wall perfectly. Thanks to the formwork’s heavy duty load capacity of 100 kN/ m² the 7 m high walls could be poured without any speed restrictions and in one go. The panels were tied through the existing walls.
The high floating roof of the campus auditorium was also poured with a high quality architectural finish and supported by ID15 shoring towers.
The existing columns were cladded in concrete. Mammut wall panels achieved the 112 x 150 cm footprint and 5.50 m height with a minimum of effort. The architects had a special design in mind for the finish, achieved easily and effectively by mounting birchwood ply facing to the formwork.
Referencen for Projets in Commercial & Residential Construction, Architectural Construction, High-Rise Construction and Civil Engineering Construction
Four apartment buildings at heights up to 202 m by 2020: the city centre redevelopment project Deansgate Square. In use for a total of 194 storeys: the automatic MAC climbing system from MEVA
One of Ontario’s busiest transportation corridors, Highway 400, began a major expansion project through Kings Township in late 2016. This $79.3 million dollar (CAD) project includes the widening of the highway from three to six lanes in each direction for a two mile stretch and also entails safer on and off ramps, the expansion and realignment of culverts, and the replacement of two bridges − one of them the South Canal Bridge.
The new theater is called The Otto M. Budig Theater and located in Cincinnati’s Over-The-Rhine district. When completed, it will become the last section of the planned “Classical Arts Corridor” in Cincinnati, which also includes a Music Hall, School for Creative and Performing Arts, and a park.